* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Бесплатна стандардна испорака за нарачки над 9,9 $
Политика за враќање
Враќање на предмети ќе биде прифатено во рок од 40 дена од датумот на примање на стоката. Прилагодените предмети не можат да се вратат или заменат. Предметите купени со е-пошта картичка се заменливи само; рефундирање не е применливо.
Бесплатен подарок
Добредојдовте во Roymall, вашата професионална веб-страница за купување премиум подароци од универзитетскиот магацин. Ние високо ги цениме и признаваме вашата поддршка и сакаме да ја изразиме нашата благодарност со додавање на дополнителен допир на возбуда на вашите нарачки. Кога купувате кај нас, не само што ќе уживате во висококвалитетни производи кои го подобруваат вашиот животен стил, туку ќе добиете и ексклузивен бесплатен подарок со секоја нарачка што ја направите. Подготвени да ја истражите нашата колекција и да ги пронајдете вашите совршени подароци? Прелистајте го нашиот избор на премиум предмети од универзитетскиот магацин, направете ја вашата нарачка и очекувајте ја возбудата од вашиот бесплатен подарок кој ќе пристигне заедно со вашата нарачка.
Политика за испорака
Ние ќе работиме напорно за да ги испорачаме предметите до вас по примање на вашите нарачки и ќе се осигураме дека безбедно ќе пристигнат. Деталите за испорака ќе бидат обезбедени во вашата е-пошта за потврда.Во повеќето случаи, нарачките се обработуваат во рок од 2 дена.Во посебни околности, ќе биде одложено на следниов начин: Кога ќе направите нарачка во сабота, недела или празници, ќе биде одложено за 2 дена..Нормално, потребни се 5-7 работни дена (од понеделник до петок) без да бидете погодени од одложување на летот или други фактори на животната средина..Бидејќи нашата услуга за испорака е ширум светот, времињата за испорака ќе зависат од вашата локација, па може да биде потребно неколку пати и ве молам стрпливо почекајте ако сте во оддалечени области или земји.
1. Политика за враќање и замена
Ние прифаќаме само предмети купени од roymall.com. Ако купите од нашите локални дистрибутери или други продавници, не можете да ги вратите кај нас.Конечните ставки за продажба или бесплатни подароци не се прифатливи за враќање.За да бидете подобни за враќање, вашиот предмет мора да биде неискористен и во иста состојба во која сте го примиле. Исто така мора да биде во оригиналното пакување.Откако ќе ги добиеме инструкциите за враќање од нас, ве молам упакете ги вашите вратени предмети и испратете ја вашата пратка на локалната пошта или друг курир. Ние ќе ја обработиме вашата вратена или заменета ставка во рок од 3-5 работни дена откако ќе ја примиме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Не се прифаќаат враќања или замени ако производот е прилагоден, вклучувајќи прилагодена големина, прилагодена боја или прилагоден печат.Потребна е повеќе помош, контактирајте не. service@roymall.com или Whatsapp: +447549870296
2.Политика за рефундирање
Ќе добиете целосно рефундирање или 100% кредит во продавницата откако ќе ја примиме вратената пратка и ќе ја провериме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Ве молиме имајте предвид дека трошоците за испорака и какви било давачки или такси не се рефундирани. Дополнителните трошоци за испорака не се рефундирани откако пратката ќе биде испратена. Вие сте одговорни за плаќање на овие такси и ние не сме во можност да ги откажеме или рефундираме, дури и ако нарачката е вратена кај нас.Откако ќе го примиме и потврдиме вашиот вратен предмет, ќе ви испратиме е-пошта за да ве известиме дека го примивме вашиот вратен предмет. Исто така ќе ве известиме за одобрувањето или одбивањето на вашето рефундирање.Ако имате какви било проблеми во врска со процесот на рефундирање, контактирајте не. service@roymall.com или Whatsapp: +447549870296
Note: The switcher is blue color instead of green.
EWRF is a brand dedicated to the production of FPV transmission equipment and RC accessories. Its products are widely used in drone racing, aerial photography, and remote-controlled modeling. The Upgraded TS5823 Pro is a high-performance 5.8GHz video transmitter designed for FPV enthusiasts who seekk the ultimate flying experience. Through continuous technological upgrades and optimizations, this product delivers stable and clear video transmission, making it a reliable choice for FPV flight.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 61|
Show Original
A part of the QA has been auto-translated.
0
Q:
is it possible to connect without switch. powerboard->vtx <- cam with the included cable (sig .gnd - red ?
is it possible to connect without switch. powerboard->vtx <- cam with the included cable (sig .gnd - red ?
I installed the camera assembly on a receiver port controlled by a three way switch. Switching between the cameras is easy and fast. I verified all three switch positions activate a camera. Third camera has been ordered.
I installed the camera assembly on a receiver port controlled by a three way switch. Switching between the cameras is easy and fast. I verified all three switch positions activate a camera. Third camera has been ordered.
Answered by BG341015194 on 21/08/2021Helpful (0)
0
Q:
I bought the kit without a receiver, can I purchase it separately? Can you give me a link?
ho acquistato il kit senza ricevitore, potrei acquistarlo a parte? mi dai un link?
This is the FPV receiver link. Thank you. https://www.banggood.com/Eachine-ROTG01-Pro-UVC-OTG-5_8G-150CH-Full-Channel-FPV-Receiver-W-or-Audio-For-Android-Smartphone-p-1347396.html?cur_warehouse=CN&ID=6287845
This is the FPV receiver link. Thank you. https://www.banggood.com/Eachine-ROTG01-Pro-UVC-OTG-5_8G-150CH-Full-Channel-FPV-Receiver-W-or-Audio-For-Android-Smartphone-p-1347396.html?cur_warehouse=CN&ID=6287845
Answered by The seller on 29/03/2025Helpful (0)
0
Q:
(How) is it possible to get On-Screen-Display (OSD) data onto the image by passing the signal through the FC as I normally would? Thanks.
(How) is it possible to get On-Screen-Display (OSD) data onto the image by passing the signal through the FC as I normally would? Thanks.
Yes, these should work with a pass through there should be guides on how to do it online
Yes, these should work with a pass through there should be guides on how to do it online
Answered by BG135355226 on 13/09/2021Helpful (0)
0
Q:
Does this system transmit the image from both cams simultaneously on a single channel? Or do you have to choose which cam is to be transmitted... or does it transmit each cam on its own channel (or can a second vid tx be hooked up so that both cams could be transmitted simultaneously?) [Hoping to set up a stereoscopic (3D) FPV setup, to potentially be used with dual diversity reciever)
Does this system transmit the image from both cams simultaneously on a single channel? Or do you have to choose which cam is to be transmitted... or does it transmit each cam on its own channel (or can a second vid tx be hooked up so that both cams could be transmitted simultaneously?) [Hoping to set up a stereoscopic (3D) FPV setup, to potentially be used with dual diversity reciever)
it is a swich that switches between 2 or 3 cameras on aux 3 of a frsky or sbus transmitter . you configure aux 3 or channel 7 to a switch on your ctx radio control and run a wire from the reciever sbus out to your camera swith s pad . power + and - . and the cameras . vid out to the vtx or through a flight controller for on screen display to be addedto the video sent to your goggles or monitor .
It is a switch that switches between 2 or 3 cameras on AUX 3 of a FrSky or SBUS transmitter. You configure AUX 3 or Channel 7 to a switch on your CTX radio control and run a wire from the receiver SBUS out to your camera switch's pad. Power and - ._ and the cameras. Video out to the VTX or through a flight controller for on-screen display to be added to the video sent to your goggles or monitor.
it hooks paralell to you drone recievers sbus out to flight controller and responds to aux ( channel 7) of tor transmitter . fr sky and multiprotocol tx with frsky will change between cameras on a drone . one camera lointin level , and one camera pointing down for example . it uses thhe same remote to switch between cameras that you use to control the model .
it hooks parallel to your drone receivers sbus out to flight controller and responds to aux (channel 7) of the tor transmitter. fr sky and multiprotocol tx with frsky will change between cameras on a drone. one camera pointing level, and one camera pointing down for example. it uses the same remote to switch between cameras that you use to control the model.
Answered by BG234816141 on 17/03/2024Helpful (0)
0
Q:
hello,can i change the transmitter to DTX*****.8G ,72Chris,0/25mW/50mW/200mW switchable VTX Transmitter?
hello,can i change the transmitter to DTX*****.8G ,72Chris,0/25mW/50mW/200mW switchable VTX Transmitter?
Hi, yes but make sure you check the wire polarity there clearly marked ,you can use most transmitters . cheers
Hi, yes but make sure you check the wire polarity there clearly marked ,you can use most transmitters . cheers
Answered by RAZZORR55 on 12/11/2021Helpful (0)
0
Q:
I ask for help! I bought this kit and connected it to a 6 volt 2500mah battery but when the monitor is positioned on the frequency of the tx I do not see the image but only a black screen. Did I get the power wrong? Is 6 volts too low? thank you very much.
I ask for help! I bought this kit and connected it to a 6 volt 2500mah battery but when the monitor is positioned on the frequency of the tx I do not see the image but only a black screen. Did I get the power wrong? Is 6 volts too low? thank you very much.
6V is incompatible, you should use 3S 11.1V power supply.
6V is incompatible, you should use 3S 11.1V power supply.
Answered by Scuttle_butt on 21/06/2021Helpful (0)
0
Q:
I need help with the installation please. I bought the Lipo 3S 11.1V 800mAh battery, except I don't understand how to install everything Please really if someone can show me the complete assembly in photo.
J’ai besoin d’aide pour l’installation s’il vous plaît. J’ai acheté la batterie Lipo 3S 11,1V 800mAh, sauf que je ne comprend pas comment tout installer S’il vous plaît vraiment si quelqu’un peut me montrer le montage complet en photo I need help with the installation please. I bought the Lipo 3S 11.1V 800mAh battery, except I don't understand how to install everything Please really if someone can show me the complete assembly in photo
This is the complete picture of the whole set of assembly, please click the link, I hope it can help you. I wish you a happy life. Thank you. http://myosuploads3.banggood.com/products/20250313/20250313215737SKUF04581.jpghttp://myosuploads3.banggood.com/products/20250313/20250313215725SKUF04581-2.jpg
This is the complete picture of the whole set of assembly, please click the link, I hope it can help you. I wish you a happy life. Thank you. http://myosuploads3.banggood.com/products/20250313/20250313215737SKUF04581.jpghttp://myosuploads3.banggood.com/products/20250313/20250313215725SKUF04581-2.jpg
bunu Bluetooth ile kullanamazsınız. rotg02 vb alıcı ile bağlamanız gerekli.
you cannot use this with Bluetooth. You need to connect with rotg02, and so on.
Answered by aktanahmet on 27/08/2022Helpful (0)
0
Q:
My transmitter and 3 channel Switcher plugs into my rc car receiver which outputs 8.4 volts. The transmitter, camera etc works perfectly fine however when you steer the servo the transmitter enters pit mode and turns off pit mode again when you stop steering. is this normal or is it a problem? if so any ideas on how I fix it?
My transmitter and 3 channel Switcher plugs into my rc car receiver which outputs 8.4 volts. The transmitter, camera etc works perfectly fine however when you steer the servo the transmitter enters pit mode and turns off pit mode again when you stop steering. is this normal or is it a problem? if so any ideas on how I fix it?
You can receive the signal from the transmitter in this kit throught anything like: fpv monitor, goggles etc
You can receive the signal from the transmitter in this kit throught anything like: fpv monitor, goggles etc
Answered by BG503175681 on 26/04/2022Helpful (0)
0
Q:
I would like to know the range and if possible be able to go beyond the 600m... And be sure for the screen which to take for its works well..I have as remote a fly ski mt***** hp average carry from 1 to 2.5 km on the ground..c is for a Rc monster truck (big foot 2-3S and or traxxas sledge 6s..thank you in advance for your wise advice
j aimerais savoir la porté et si possible être capable d allé au delà du 600m... Et être sûre pour l écran quelle prendre pour sa fonctionne bien..j ai comme télécommande une fly ski mt***** ch porté moyenne de 1 a 2.5 km au sol..c est pour un Rc monstre truck ( big foot 2-3S et ou traxxas sledge 6s..merci en avance de vos conseil avisé
Thisis only a transmitter with 3 channel video switcher. You will need a separate receiver for this.
Thisis only a transmitter with 3 channel video switcher. You will need a separate receiver for this.
Answered by stefanspi on 17/02/2022Helpful (0)
0
Q:
möchte mit einer fbv Brille es nutzen .
können Sie mir auch eine fbv Brille empfehlen für das Cam system .. und wie steuere ich den es ??? mit der Brille bestimmt nicht .was Brauch ich dafür möchte es in ein Auto ein bauen und mit Brille fahren ....
bzw .
oder würden sie mir den da was anderes empfehlen ..
den das Auto läuft ja mit 3kanal und 2,4ghz nur ...
wie bekomme ich den das alles unter einen Hut so das man den fbv fahren kann ....Gruß u. Danke für jede antwort die ich bekommen könnte...
möchte mit einer fbv Brille es nutzen .
können Sie mir auch eine fbv Brille empfehlen für das Cam system .. und wie steuere ich den es ??? mit der Brille bestimmt nicht .was Brauch ich dafür möchte es in ein Auto ein bauen und mit Brille fahren ....
bzw .
oder würden sie mir den da was anderes empfehlen ..
den das Auto läuft ja mit 3kanal und 2,4ghz nur ...
wie bekomme ich den das alles unter einen Hut so das man den fbv fahren kann ....Gruß u. Danke für jede antwort die ich bekommen könnte...
https://www.banggood.com/Eachine-EV800DM-Varifocal-5_8G-40CH-Diversity-FPV-Goggles-with-HD-DVR-3-Inch-900+600-Video-Headset-Build-in-2000mAh-Battery-p-1553838.html 5,8-GHz-FPV-Brillen sind kompatibel. 3CH ist nicht genug, vielleicht können Sie es als normale Kamera mit Sender verwenden, ohne die Umschaltfunktion zu verwenden.
https://www.banggood.com/Eachine-EV800DM-Varifocal-5_8G-40CH-Diversity-FPV-Goggles-with-HD-DVR-3-Inch-900+600-Video-Headset-Build-in-2000mAh-Battery-p-1553838.html 5,8-GHz-FPV-Brillen sind kompatibel. 3CH ist nicht genug, vielleicht können Sie es als normale Kamera mit Sender verwenden, ohne die Umschaltfunktion zu verwenden.
This combo is including camera and tranmitter, what you need is a monitor with receiver.
https://www.banggood.com/ZENCHANSI-800+480-5_8G-48CH-5-Inch-LCD-16-9-Auto-Search-Frequency-Mini-Monitor-Build-in-Battery-For-RC-Multicopter-FPV-Drone-p-1911229.html?cur_warehouse=CN&rmmds=search
This combo is including camera and tranmitter, what you need is a monitor with receiver.
https://www.banggood.com/ZENCHANSI-800+480-5_8G-48CH-5-Inch-LCD-16-9-Auto-Search-Frequency-Mini-Monitor-Build-in-Battery-For-RC-Multicopter-FPV-Drone-p-1911229.html?cur_warehouse=CN&rmmds=search
Answered by Pyroballogy on 15/11/2021Helpful (0)
0
Q:
Can this kit be used only one camera or only with the two?? And about the image is it pretty sharp or is it bad??
esse kit pode ser usado somente uma câmera ou somente com as duas ?? e sobre a imagem é bem nítida ou é ruim ??
connect it to powerboard. Both vtx and camera can be connected separately or you can connect vtx to vcc pad and let vtx feed to cams. suprisingly ok quality
connect it to powerboard. Both vtx and camera can be connected separately or you can connect vtx to vcc pad and let vtx feed to cams. suprisingly ok quality
Answered by BG101533910 on 22/07/2021Helpful (0)
0
Q:
Good day, two questions ... Does the black/red/white cable from the switcher plug into the receiver? Does the video transmitter need a power supply using the black/red/white wires which are not terminated or stripped, or does it draw power from through the connection to the switcher?
Good day, two questions ... Does the black/red/white cable from the switcher plug into the receiver? Does the video transmitter need a power supply using the black/red/white wires which are not terminated or stripped, or does it draw power from through the connection to the switcher?
The black/red/white wire of the switcher is the signal wire, which is plug into the receiver that supports the PWM signal. The power supply of the entire FPV system including the switcher is independent. The red/black line of the VTX is power wire for the complete set , supporting 7V-24V power input.
The black/red/white wire of the switcher is the signal wire, which is plug into the receiver that supports the PWM signal. The power supply of the entire FPV system including the switcher is independent. The red/black line of the VTX is power wire for the complete set , supporting 7V-24V power input.
Answered by Gangar9Zweet on 06/07/2021Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.