* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Бесплатна стандардна испорака за нарачки над 9,9 $
Политика за враќање
Враќање на предмети ќе биде прифатено во рок од 40 дена од датумот на примање на стоката. Прилагодените предмети не можат да се вратат или заменат. Предметите купени со е-пошта картичка се заменливи само; рефундирање не е применливо.
Бесплатен подарок
Добредојдовте во Roymall, вашата професионална веб-страница за купување премиум подароци од универзитетскиот магацин. Ние високо ги цениме и признаваме вашата поддршка и сакаме да ја изразиме нашата благодарност со додавање на дополнителен допир на возбуда на вашите нарачки. Кога купувате кај нас, не само што ќе уживате во висококвалитетни производи кои го подобруваат вашиот животен стил, туку ќе добиете и ексклузивен бесплатен подарок со секоја нарачка што ја направите. Подготвени да ја истражите нашата колекција и да ги пронајдете вашите совршени подароци? Прелистајте го нашиот избор на премиум предмети од универзитетскиот магацин, направете ја вашата нарачка и очекувајте ја возбудата од вашиот бесплатен подарок кој ќе пристигне заедно со вашата нарачка.
Политика за испорака
Ние ќе работиме напорно за да ги испорачаме предметите до вас по примање на вашите нарачки и ќе се осигураме дека безбедно ќе пристигнат. Деталите за испорака ќе бидат обезбедени во вашата е-пошта за потврда.Во повеќето случаи, нарачките се обработуваат во рок од 2 дена.Во посебни околности, ќе биде одложено на следниов начин: Кога ќе направите нарачка во сабота, недела или празници, ќе биде одложено за 2 дена..Нормално, потребни се 5-7 работни дена (од понеделник до петок) без да бидете погодени од одложување на летот или други фактори на животната средина..Бидејќи нашата услуга за испорака е ширум светот, времињата за испорака ќе зависат од вашата локација, па може да биде потребно неколку пати и ве молам стрпливо почекајте ако сте во оддалечени области или земји.
1. Политика за враќање и замена
Ние прифаќаме само предмети купени од roymall.com. Ако купите од нашите локални дистрибутери или други продавници, не можете да ги вратите кај нас.Конечните ставки за продажба или бесплатни подароци не се прифатливи за враќање.За да бидете подобни за враќање, вашиот предмет мора да биде неискористен и во иста состојба во која сте го примиле. Исто така мора да биде во оригиналното пакување.Откако ќе ги добиеме инструкциите за враќање од нас, ве молам упакете ги вашите вратени предмети и испратете ја вашата пратка на локалната пошта или друг курир. Ние ќе ја обработиме вашата вратена или заменета ставка во рок од 3-5 работни дена откако ќе ја примиме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Не се прифаќаат враќања или замени ако производот е прилагоден, вклучувајќи прилагодена големина, прилагодена боја или прилагоден печат.Потребна е повеќе помош, контактирајте не. service@roymall.com или Whatsapp: +447549870296
2.Политика за рефундирање
Ќе добиете целосно рефундирање или 100% кредит во продавницата откако ќе ја примиме вратената пратка и ќе ја провериме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Ве молиме имајте предвид дека трошоците за испорака и какви било давачки или такси не се рефундирани. Дополнителните трошоци за испорака не се рефундирани откако пратката ќе биде испратена. Вие сте одговорни за плаќање на овие такси и ние не сме во можност да ги откажеме или рефундираме, дури и ако нарачката е вратена кај нас.Откако ќе го примиме и потврдиме вашиот вратен предмет, ќе ви испратиме е-пошта за да ве известиме дека го примивме вашиот вратен предмет. Исто така ќе ве известиме за одобрувањето или одбивањето на вашето рефундирање.Ако имате какви било проблеми во врска со процесот на рефундирање, контактирајте не. service@roymall.com или Whatsapp: +447549870296
Description:Brand: JJAModel: MINI B19Image Sensor: 1/3" CMOS
Pretty good. Good image quality. Fast response. A lot of options in OSD menu. Alternatively can have CVBS, TVI, CVI and AHD output. Contrast, brightness, exposure, WDR and etc. Must play a lot with those options to configure it good. The only minus is a bit higher current consumption. The camera itself and some DVR parts get pretty hot with the working time, but no smoke. Maybe 60deg. So will be OK in long run.
Pretty good. Good image quality. Fast response. A lot of options in OSD menu. Alternatively can have CVBS, TVI, CVI and AHD output. Contrast, brightness, exposure, WDR and etc. Must play a lot with those options to configure it good. The only minus is a bit higher current consumption. The camera itself and some DVR parts get pretty hot with the working time, but no smoke. Maybe 60deg. So will be OK in long run.
Pretty good. Good image quality. Fast response. A lot of options in OSD menu. Alternatively can have CVBS, TVI, CVI and AHD output. Contrast, brightness, exposure, WDR and etc. Must play a lot with those options to configure it good. The only minus is a bit higher current consumption. The camera itself and some DVR parts get pretty hot with the working time, but no smoke. Maybe 60deg. So will be OK in long run.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
Did somebody know how to reset to factory settings this camera? Because I've changed something in OSD and after that there is no picture at all, don't know how to make it work again? Maybe it has nothing to do with OSD, but not working at all :( power supply and fpv transmitter is working, there is picture with other camera. Please help somebody to make it work again, it was on just only for 5 minutes...
Did somebody know how to reset to factory settings this camera? Because I've changed something in OSD and after that there is no picture at all, don't know how to make it work again? Maybe it has nothing to do with OSD, but not working at all :( power supply and fpv transmitter is working, there is picture with other camera. Please help somebody to make it work again, it was on just only for 5 minutes...
Hi, i have find with another b19 :
push on 1x (Time), push down 3x, push on 1x, push down 4x, push on 1x, push left 1x, push down 3x, push on 1x, push down 3x then push on 1x.
disconnect and reconnect, if not fonction, restart this procédure, (3 x for me return to standard vidéo out).
Hi, i have find with another b19 :
push on 1x (Time), push down 3x, push on 1x, push down 4x, push on 1x, push left 1x, push down 3x, push on 1x, push down 3x then push on 1x.
disconnect and reconnect, if not fonction, restart this procédure, (3 x for me return to standard vidéo out).
Could you please update the ad to specify that this is a 16:9 camera. I just received mine to use with 4:3 goggles, and it's no good. Also a very narrow FOV, even with the 2.1mm (1/1.8") lens. Maybe wrong lens chosen for this 1/3 sensor.
Could you please update the ad to specify that this is a 16:9 camera. I just received mine to use with 4:3 goggles, and it's no good. Also a very narrow FOV, even with the 2.1mm (1/1.8") lens. Maybe wrong lens chosen for this 1/3 sensor.
Are you 100% certain your goggles don't have a 16:9 option somewhere in settings? Hope they do. If in doubt post asking if anyone knows of a way to find the option. Dude with the 'really' comment, maybe its obvious to you or maybe your kit is all 16:9, that's great, but why not just try help out someone who either doesn't have the kit or maybe doesn't know? It doesn't hurt you and you might just solve a problem that's second nature to you but others might struggle with, I hate to think how much I've wasted on incompatible kit due to just not being experienced or as knowledgeable as I wish I was, small stuff like 16:9 in the listing, or details on how to switch to 4:3 if possible might really help so I think the op does have a valid point, even if it may apply to a minority of buyers.
Are you 100% certain your goggles don't have a 16:9 option somewhere in settings? Hope they do. If in doubt post asking if anyone knows of a way to find the option. Dude with the 'really' comment, maybe its obvious to you or maybe your kit is all 16:9, that's great, but why not just try help out someone who either doesn't have the kit or maybe doesn't know? It doesn't hurt you and you might just solve a problem that's second nature to you but others might struggle with, I hate to think how much I've wasted on incompatible kit due to just not being experienced or as knowledgeable as I wish I was, small stuff like 16:9 in the listing, or details on how to switch to 4:3 if possible might really help so I think the op does have a valid point, even if it may apply to a minority of buyers.
Answered by BG502556513 on 27/05/2021Helpful (0)
0
Q:
What is the safe input voltage of this camera? Thank you.
What is the safe input voltage of this camera? Thank you.
Unfortunately, without using Betaflight I don't think that this is possible.
Unfortunately, without using Betaflight I don't think that this is possible.
Answered by Madav65 on 20/08/2021Helpful (0)
0
Q:
How do you get this camera to display battery voltage using the camera OSD? Just wondering where the setting is so you can view the voltage going into the camera. Cheers
How do you get this camera to display battery voltage using the camera OSD? Just wondering where the setting is so you can view the voltage going into the camera. Cheers
I changed the transfer mode in the camera osd and now have a black screen, and no osd shows up. Is there a way to switch it back or factory reset when I cant access the settings?
I changed the transfer mode in the camera osd and now have a black screen, and no osd shows up. Is there a way to switch it back or factory reset when I cant access the settings?
I dont think there is a way to reset this manually without seeing what's on the osd screen to see what your doing. I had same problem twice j purchased that exact camera and same feedback I found out what you are saying
I dont think there is a way to reset this manually without seeing what's on the osd screen to see what your doing. I had same problem twice j purchased that exact camera and same feedback I found out what you are saying