* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Бесплатна стандардна испорака за нарачки над 9,9 $
Политика за враќање
Враќање на предмети ќе биде прифатено во рок од 40 дена од датумот на примање на стоката. Прилагодените предмети не можат да се вратат или заменат. Предметите купени со е-пошта картичка се заменливи само; рефундирање не е применливо.
Бесплатен подарок
Добредојдовте во Roymall, вашата професионална веб-страница за купување премиум подароци од универзитетскиот магацин. Ние високо ги цениме и признаваме вашата поддршка и сакаме да ја изразиме нашата благодарност со додавање на дополнителен допир на возбуда на вашите нарачки. Кога купувате кај нас, не само што ќе уживате во висококвалитетни производи кои го подобруваат вашиот животен стил, туку ќе добиете и ексклузивен бесплатен подарок со секоја нарачка што ја направите. Подготвени да ја истражите нашата колекција и да ги пронајдете вашите совршени подароци? Прелистајте го нашиот избор на премиум предмети од универзитетскиот магацин, направете ја вашата нарачка и очекувајте ја возбудата од вашиот бесплатен подарок кој ќе пристигне заедно со вашата нарачка.
Политика за испорака
Ние ќе работиме напорно за да ги испорачаме предметите до вас по примање на вашите нарачки и ќе се осигураме дека безбедно ќе пристигнат. Деталите за испорака ќе бидат обезбедени во вашата е-пошта за потврда.Во повеќето случаи, нарачките се обработуваат во рок од 2 дена.Во посебни околности, ќе биде одложено на следниов начин: Кога ќе направите нарачка во сабота, недела или празници, ќе биде одложено за 2 дена..Нормално, потребни се 5-7 работни дена (од понеделник до петок) без да бидете погодени од одложување на летот или други фактори на животната средина..Бидејќи нашата услуга за испорака е ширум светот, времињата за испорака ќе зависат од вашата локација, па може да биде потребно неколку пати и ве молам стрпливо почекајте ако сте во оддалечени области или земји.
1. Политика за враќање и замена
Ние прифаќаме само предмети купени од roymall.com. Ако купите од нашите локални дистрибутери или други продавници, не можете да ги вратите кај нас.Конечните ставки за продажба или бесплатни подароци не се прифатливи за враќање.За да бидете подобни за враќање, вашиот предмет мора да биде неискористен и во иста состојба во која сте го примиле. Исто така мора да биде во оригиналното пакување.Откако ќе ги добиеме инструкциите за враќање од нас, ве молам упакете ги вашите вратени предмети и испратете ја вашата пратка на локалната пошта или друг курир. Ние ќе ја обработиме вашата вратена или заменета ставка во рок од 3-5 работни дена откако ќе ја примиме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Не се прифаќаат враќања или замени ако производот е прилагоден, вклучувајќи прилагодена големина, прилагодена боја или прилагоден печат.Потребна е повеќе помош, контактирајте не. service@roymall.com или Whatsapp: +8619359849471
2.Политика за рефундирање
Ќе добиете целосно рефундирање или 100% кредит во продавницата откако ќе ја примиме вратената пратка и ќе ја провериме. Рефундирањето ќе се обработи и автоматски ќе се кредитира на вашиот оригинален начин на плаќање.Ве молиме имајте предвид дека трошоците за испорака и какви било давачки или такси не се рефундирани. Дополнителните трошоци за испорака не се рефундирани откако пратката ќе биде испратена. Вие сте одговорни за плаќање на овие такси и ние не сме во можност да ги откажеме или рефундираме, дури и ако нарачката е вратена кај нас.Откако ќе го примиме и потврдиме вашиот вратен предмет, ќе ви испратиме е-пошта за да ве известиме дека го примивме вашиот вратен предмет. Исто така ќе ве известиме за одобрувањето или одбивањето на вашето рефундирање.Ако имате какви било проблеми во врска со процесот на рефундирање, контактирајте не. service@roymall.com или Whatsapp: +8619359849471
Features:
- DC5-48V automatic identification
- When the DC terminal has power, it is connected to the battery to charge
- The charging parameters have nothing to do with this module, depending on the DC terminal, battery, and load.
- Product load: 10A
- Product size: 61mm*29mm
Package Incldued:
1 x YX850 Power Failure Automatic Switching Standby Battery Lithium Battery Module
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-8 of 8|
Show Original
A part of the QA has been auto-translated.
0
Q:
Hmm could you possibly use this with a solar panel as your “mains” – switching between charging a 18650 battery then also powering some very low power led lights? Thoughts anyone? Thank you.
Hmm could you possibly use this with a solar panel as your “mains” – switching between charging a 18650 battery then also powering some very low power led lights? Thoughts anyone? Thank you.
a). I want to connect a 20V DC to the Input Terminal: b). Connect a 11.1 volt Li ion Battery then
c). Connect 12v DC to load.
My questions are: Will the output remain constant at 12 .6 volt DC at "LOAD" ?
a). I want to connect a 20V DC to the Input Terminal: b). Connect a 11.1 volt Li ion Battery then
c). Connect 12v DC to load.
My questions are: Will the output remain constant at 12 .6 volt DC at "LOAD" ?